Vitek VT-EHP Series, Manal

Page: 3 / 111

VT-EHP
2
OVERVIEW
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
1) Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter
could cause fire, electrical shock, or damage to the product.
2) Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage
to the product.
3) Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat
generation or fire.
4) Securely plug the power cord into the power receptacle. Insecure connection may cause fire.
5) When installing the camera, fasten it securely and firmly. A falling camera may cause personal injury.
6) Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top
of the device. Doing so may cause personal injury due to fire, electric shock, or falling objects.
7) Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.
8) If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect
the power source and contact the service center. Continued use in such a condition may cause fire or electric
shock.
9) If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this
product in any way. (We are not liable for problems caused by unauthorized modifications or attempted repair.)
10) When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.
11) Do not expose the product to the direct airflow from an air conditioner.