Vitek VT-8305 VT, Manual Instruction

Page: 9 / 60

9
ENGLISH
ATTENTION!
If the steam is not constantly supplied during operation,
check whether the temperature control knob (11) is set
properly, the handle (12) is in the right position and there
is water in the water tank (4).
BURST OF STEAM
The burst of steam function is useful for ironing folds and
can only be used at high ironing temperatures (when the
iron temperature control knob (11) is set to the «
••• »
position).
When pressing the burst of steam button (2) steam will go
out of the iron soleplate more intensively.
Note:
– To avoid water leakage from steam openings, press
the burst of steam button (2) with a 10-15 sec. interval.
VERTICAL STEAMING
Vertical steam function can be used only at high ironing
temperatures (when the iron temperature control knob
(11) is set to the «
••• » position).
Hold the iron vertically at the distance of 10-15 cm from
the clothes, press the burst of steam button (2) with a
10–15 second interval, steam will be heavily supplied
from the iron soleplate (9).
IMPORTANT INFORMATION
•
Vertical steaming is not recommended for synthetic
fabrics.
•
To avoid fabric melting, do not touch it with the iron
soleplate (9) while steaming.
•
Never steam clothes on a person as the tempera-
ture of the released steam is very high, use a clothes
hanger or a coat rack.
CLEANING AND CARE
•
Make sure that the unit is unplugged and cooled
down.
•
Clean the unit body with a slightly damp cloth and
then wipe it dry.
•
Scale on the iron soleplate can be removed with a
cloth soaked in the vinegar-water solution.
•
After removing scale, polish the soleplate surface
with a dry cloth.
IM VT-8305_70x130.indd 9 28.11.2017 9:22:55