Vitek VT-8289, Manual Instruction

Page: 5 / 36

5
ENGLISH
Be careful! The heating plates and the unit body in the
area of the heating plates stay hot for some time after the
unit is unplugged.
• It is recommended to unwind the power cord to its full
length while using the unit.
•
The power cord may not:
– touch hot objects,
– run over sharp edges,
– be used as a handle for carrying the unit.
• Check the integrity of the power cord periodically.
• Do not use the unit if the power plug or the power cord
is damaged, if the unit works improperly and after it
was dropped.
• If the power cord is damaged, it should be replaced by
the manufacturer, service or similar qualified personnel
to avoid danger.
• Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it
was dropped, unplug the unit and apply to any autho-
rized service center at the contact addresses given in
the warranty certificate and on the website www.vitek.ru.
•
To avoid damages, transport the unit in the original
package only.
• Keep the unit in a dry cool place out of reach of children
and disabled persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature
before switching on.
•
Unpack the unit completely and remove any packaging
materials that can prevent the unit operation.
• Unwind the power cord to its full length.
•
Check the unit for damages, do not use it in case of
damages.