Vitek VT-8236, Instruction Manual, Page: 3 / 36

3
ENGLISH
HOT AIR STYLER VT-8236
The hot air styler is used for styling dry or slightly wet hair.
DESCRIPTION
1.
Thermal brush
2.
Attachment installation place
3.
Attachment lock
4.
Operation mode switch «0- -1-2»
5.
Body
6.
Air inlets
7.
Hanging loop
8.
Nozzle
ATTENTION!
•
Do not use the unit near water in the bathrooms, show-
ers, swimming pools etc.
•
After using the unit in a bathroom, unplug it by
taking the power plug out of the mains socket, as
closeness of water is dangerous even if the unit is
switched off.
•
For additional protection you may install a residual cur-
rent device (RCD) with nominal operation current not
exceeding 30 mA into the bathroom mains; contact
a specialist for installation.
SAFETY MEASURES
Before using the unit, read this manual carefully and keep it
for future reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit can lead to its break-
age and cause harm to the user or damage to his/her
property.
•
Before switching the hot air brush on, make sure that
your home mains voltage corresponds to the unit oper-
ating voltage.
•
To avoid fire, do not use adapters for connecting the
unit to the mains.
•
Do not use the unit outdoors.
•
Use only the attachments supplied.
•
When using the unit, we recommend to unwind the
power cord to its full length.
IM VT-8236_70x130.indd 3 25.02.2019 14:07:47