5
ENGLISH
Natural waving structure of your hair
Set switch (2) into position of slight heating
(position I), then set switch (2) into position I,
hold a lock between your fingers tightly, turn it
to direction of its natural curliness, then dry the
lock out by directing air jet between the fingers.
After getting the shape you need, press cool
shot button « » (3) and fix each lock.
Rising up and volume
Using hair dryer in any mode of heating/any
speed from slight to maximal, dry out hair roots
beginning from backside of your head.
Styling your hair
Set switches (1,2) into positions of slight heat-
ing and slow speed correspondingly, attach
concentrating nozzle (4) to provide directed
airflow.
Divide your hair into locks and start creating
hairstyle you need using round brush for set-
ting hair. While styling, direct airflow straight on
your hair in any direction you want.
If necessary, direct air jet on each lock for
2-5 seconds to fix it. Time of setting locks you
should determine on your own taking into ac-
count type of your hair.
«Cool shot»
This model is equipped with function of «cool
shot», which can be used for fixing your hair-
style. Press and hold «cool shot» button (3) « ».
This option helps to protect the hairstyle you
have created.
PROTECTION AGAINST OVERHEATING
The appliance is equipped with function of
protection against overheating. This func-
tion switches the appliance off if temperature
of outgoing air is higher then admitted. If hair
dryer is switched off during operation, turn it
off by setting switch (1) into position «0», take
power cord plug out of wall outlet, examine if
air inlet or outlet openings are blocked, leave
the appliance for a while for cooling down
for 5-10 minutes, then switch it on again.
Do not block air openings while using hair dryer
and avoid your hair getting inside its air inlet
opening.
CLEANING AND MAINTENANCE
This hair dryer is intended for household usage
only.
• It is recommended to remove air inlet grill (6)
and clean it from time to time.
• Set switch (1) into position «0» and discon-
nect the appliance from power supply.
• Take the grid (6), turn it counterclockwise
and remove it. Clean the grid with a brush,
install the grid (6) back to its place and turn it
clockwise until bumping.
• Wipe hair dryer housing with damp cloth and
wipe it dry afterwards.
STORAGE
• Unplug power cord from wall outlet when hair
dryer is not in use.
• Do not wind power cord around the appli-
ance as doing so may cause cord’s mal-
function. Handle power cord carefully, do
not pull, twist or stretch it, especially near
the plug and the place of connection with
appliance housing. If power cord is twisted
during operation, straighten it from time to
time.
• Eyelid for hanging (8) is provided for con-
venient storage. You can hang the appli-
ance this way on condition there is not any
possibility of water dropping on the appli-
ance.
• Keep the unit out of reach of children and
disabled persons.
DELIVERY SET
1. Hair dryer – 1 piece
2. Concentrating nozzle – 1 piece
3. Operating manual – 1 piece
Specifications
Power supply: 220-240 V ~ 50 Hz
Rated input power: 2200 W
ATTENTION! Do not use the unit near water
in the bathrooms, showers, swimming pools
etc.
IM VT-8229.indd 5
04.09.2018 17:32:02