Vitek VT-8215 JR, Manual Instruction

Page: 3 / 32

3
ENGLISH
HAIRDRYER VT-8215 JR
The hairdryer is intended for hair drying and styling.
DESCRIPTION
1. Operation mode switch ( 0\1\2 )
2. “Cool” air button
3. Nozzle
4. Air inlet grid
5. Foldable hairdryer handle
6. Hanging loop
ATTENTION!
– After using the hairdryer in a bathroom, disconnect the
power plug from the mains socket, as water closeness
can be dangerous even if the unit is switched off.
– For additional protection you can install a residual cur-
rent device (RCD) with nominal operation current not
exceeding 30 mA into the bathroom mains; contact
a specialist for installation.
SAFETY MEASURES
Before using the unit, read this manual carefully and keep it
for future reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit can lead to its break-
age and cause harm to the user or damage to his/her
property.
•
Before switching the hairdryer on, make sure that your
home mains voltage corresponds to the unit operat-
ing voltage.
•
To avoid fire, do not use adapters for connecting the
unit to the mains.
•
Use only the attachment supplied with the unit.
•
When using the unit, we recommend to unwind the
power cord to its full length.
•
The power cord may not:
– touch hot objects,
– run over sharp edges,
– be used for carrying the unit.
•
Check the power cord and power plug insulation integ-
rity periodically.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
VT-8215_IM_70x130.indd 3 14.06.2016 15:55:05