![Vitek VT-7160 W Manual Instruction Download Page 4](http://html.mh-extra.com/html/vitek/vt-7160-w/vt-7160-w_manual-instruction_1036785004.webp)
4
ENGLISH
•
Children aged 8 and over as well as dis-
abled persons can use this unit only under
supervision of a person who is respon-
sible for their safety if they are given all
the necessary and understandable instruc-
tions concerning the safe usage of the unit
and information about danger that can be
caused by its improper usage.
•
Never pull the power cord when discon-
necting the unit from the mains, take the
power plug and carefully remove it from the
mains socket.
•
Do not use the toaster if the power cord or
the plug is damaged, if the unit malfunc-
tions or if it is damaged after falling or in
any other way or after it was dropped into
water.
•
If the power cord is damaged, it should be
replaced by the manufacturer, a mainte-
nance service or similar qualified personnel
to avoid danger.
•
To avoid electric shock do not disassemble
the unit by yourself; if necessary, apply to
the nearest authorized service center for
testing or repair. See the service center
addresses on our website www.vitek.ru or
in the warranty certificate.
•
Transport the unit in the original package
only.
•
Keep the unit out of reach of children and
disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USE ONLY, ITS COMMERCIAL USAGE AND
USAGE IN PRODUCTION AREAS AND WORK
SPACES IS PROHIBITED.
CAUTION! Metal parts of the toaster heat up
strongly during operation, do not touch them.
WARNING
•
Never try to take jammed toasts out of the
operating toaster with your hands or with a
metal object, as contact of the metal object
with the heating element under voltage
may cause electric shock.
•
Unplug the toaster from the mains, wait
until it cools down and only after that
remove the toasts carefully with a suit-
able wooden or plastic spatula. Do not use
a knife or other sharp objects, as this can
damage the heating elements.
•
To avoid burns, keep your hands and
other open parts of your body away from
the metal parts of the toaster during the
unit operation.
BEFORE USING THE UNIT FOR
THE FIRST TIME
After unit transportation or storage under
cold (winter) conditions, it is necessary
to keep it for at least three hours at room
temperature before switching on.
–
Before the first use of toaster, remove any
package materials and stickers that can
prevent normal operation of the unit.
–
Make sure that the mains voltage corre-
sponds to the voltage specified on the unit
body.
–
The unit is intended for operation from an
AC power network with the frequency of
50 or 60 Hz. The unit does not need any
additional settings for operating with the
required rated frequency.
–
There is cord storage (9) on the bottom
of the unit body. You can adjust the power
cord length by folding it in the cord storage
in a corresponding way.
–
Without loading toasts, plug the unit in,
set the toasting level control knob (8) to
the position «7» and switch the unit on by
pressing the lever (4).
–
During the first switching on the heating
elements burn, therefore occurrence of a
small amount of smoke or foreign smell is
possible. It is normal.
–
If necessary, switch the toaster on for sev-
eral times.
TIPS
–
The toasting level depends on the thick-
ness of the bread slice, bread sort and
quality. Never toast too thin or too thick
slices of bread; the thickness of the toast
should not exceed 20 mm.
–
If the toasts are jammed in the slot, press
the «STOP» button (7), unplug the toaster
and let it cool down. Use a suitable wooden
IM VT-7160.indd 4
10/9/19 10:47 AM