Vitek VT-7129 Manual Instruction Download Page 4

Page: 4 / 20

ENGLISH

the warranty certificate and on the website
www.vitek.ru.

•

To avoid damages, transport the unit in the
original package only.

•

Keep the unit out of reach of children and dis-
abled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.

BEFORE THE FIRST USE

After unit transportation or storage at low
temperature keep it for at least three hours
at room temperature before switching on.

–

Unpack the coffee grinder and remove any
packaging and advertising materials that can
prevent its operation.

–

Before using the unit, make sure that your
home mains voltage corresponds to the unit
operating voltage.

–

Remove the ground coffee container (1) with
the lid (2) pulling it towards you.

–

Remove the coffee bean container lid (7),
turn the container (8) clockwise «

» and

remove it.

–

Remove the upper millstone (9) turning it
clockwise in the «

» direction and wipe it.

–

Carefully wipe the lower millstone.

–

Wash all removable parts (1, 2, 7, 8) with warm
water and a neutral detergent, then rinse and
dry thoroughly.

–

Clean the coffee grinder body (12) with a soft,
slightly damp cloth, and then wipe it dry.

–

Install the upper millstone (9) back to its place
turning it counterclockwise in the « » direc-
tion until bumping.

–

Install the coffee bean container (8), turn
it counterclockwise « » until bumping and
cover it with the lid (7).

–

Close the ground coffee container (1) with the
lid (2) and install it to its place until the lock
(3) clicking.

USING THE COFFEE GRINDER

The maximal continuous operation time is
1 grinding cycle with a 3-5 minute subse-
quent break.

–

Unwind the power cord completely.

–

Make sure that all removable parts are
installed properly.

–

Open the lid (7) and put the coffee beans into
the container (8).

Note:

–

Do not put more than 240 g coffee beans into
the container (8).

–

Cover the container (8) with the lid (7).

–

Turn the control knob (11) to select the
required grinding degree.
«

ГРУБЫЙ

–

coarse grinding for brewing

coffee in the coffee pot
«

СРЕДНИЙ

–

medium grinding for drip cof-

fee makers
«

МЕЛКИЙ

–

grinding degree for pump-

driven coffee makers
«

СВЕРХ МЕЛКИЙ

–

the finest grinding

degree for brewing coffee in the cup

Note: - when selecting the grinding degree you
can set the knob (11) to any position within the
scale.

–

Insert the power plug into the mains socket.

–

Turn the knob (5) to set the necessary amount
of ground coffee.

–

Switch the unit on by pressing the button (6)
«

».

Note:

–

before switching the unit on make sure that
the containers (1 and 8) are installed prop-
erly and covered with the lids (2 and 7), oth-
erwise the coffee grinder will not switch on;

–

if  during  the  coffee  grinder  operation  the
coffee  beans  do  not  reach  the  millstones,
it  is  recommended  to  slightly  tilt  the  coffee
grinder or shake it carefully.

–

The coffee grinder is switched off automati-
cally.

–

If during the operation the coffee bean con-
tainer (8) becomes empty or if you need to
switch the coffee grinder off immediately,
press the on/off button (6) «

» again.

–

Unplug the unit after operation.

–

For the best taste of the ready drink grind
only necessary amount of coffee beans right
before the coffee making.

–

To prevent the flavour degradation of ground
coffee keep the fresh-ground coffee in tightly
closed jars or in a vacuum package.

CLEANING AND STORAGE

–

Unplug the coffee grinder before cleaning.

–

Disassemble the coffee grinder as described
in the chapter “BEFORE THE FIRST USE”.