Vitek VT-7124 BK, Manual Instruction, Page: 5 / 24

ENGLISH
5
–
Clean the process chamber (2),
the knives and the body (1) with
a soft, slightly damp cloth, and
then wipe them dry.
ATTENTION! The cutting edges of
the coffee grinder knives are very
sharp and dangerous.
Handle them very carefully!
Do not immerse the coffee grinder,
the power cord and the plug into
water or any other liquids. Do not
wash the unit parts in a dishwashing
machine.
Continuous operation time
Continuous operation time of
1 operation cycle should not exceed
1 minute. Make a 3-5 minute break
between cycles.
Note: Put not more than 60 g of
coffee beans into the unit process
chamber at a time.
USAGE
–
Open the lid (3).
–
Put coffee beans into the pro-
cess chamber (2).
Note: Capacity of the coffee grinder
is about 60 grams of coffee beans.
–
Close the lid (3).
Note: When the lid is closed
improperly the unit cannot be
switched on.
–
Insert the power plug into the
mains socket.
– Press and hold down the ON but-
ton (4), the coffee grinder knives
will be rotating.
– After operation release the but-
ton (4), wait for the knives full
stop and pull the power plug out
of the socket.
– Slightly tap on the lid (3) to
slough off the powder stuck to it.
–
Remove the lid (3) and put the
ground coffee into a suitable con-
tainer.
– Clean the unit.
For the best taste of the ready drink
grind only the necessary amount of
coffee beans right before the coffee
making.
Note: coffee beans should be put
into the process chamber (2) before
the unit is switched on.
Freshly ground coffee is recom-
mended to be stored in tightly closed
jars or vacuum packaging as oxygen
contained in the air adversely affects
the coffee flavor oils and deterio-
rates the finished beverage.
CLEANING
ATTENTION! The cutting edges of
the coffee grinder knives are very
sharp and dangerous. Handle them
very carefully!
– Unplug the unit before cleaning.
–
Clean the body (1), the knives
and the process chamber (2)
with a slightly damp cloth, and
then wipe them dry.
–
Wash the lid (3) with warm water
and a neutral detergent, rinse
and dry it thoroughly.
DO NOT IMMERSE THE UNIT (1)
INTO ANY LIQUIDS, DO NOT WASH
IT UNDER A WATER JET OR IN A
DISHWASHING MACHINE.
IM VT-7124.indd 5 14.07.2017 16:30:05