Vitek VT-3966B, Instruction Manual

Page: 8 / 64

ENGLISH
8
Note: you can change volume level in the
range of 0-0.
5. Switching on the alarm.
Press the TIMER/SLEEP button. “TIMER”
will appear on the LCD display.
When the preset time is reached, the alarm
will automatically switch on.
6. Switching off the alarm.
Press the TIMER/SLEEP button again. The
“TIMER” indication will disappear.
SETTING TIME FOR THE CASSETTE RE-
CORDER TO SWITCH OFF
You can set time for the cassette recorder to
switch off (max. 90 minutes).
. In the radio/cassette mode press the
TIMER/SLEEP button. The “90” minutes
indication will appear on the LCD display,
and the “SLEEP” indication will be flashing.
2. To change the time press and hold the
TIMER/SLEEP button. You can set time for
the cassette recorder to switch off in the
range of 0-90 minutes with 0 minutes step.
3. When the preset time is reached, the
cassette recorder will automatically switch
off.
. To cancel the timer mode press the TIMER/
SLEEP button again. The “SLEEP” indication
will disappear. To switch off the cassette
recorder press the POWER button.
SETTING EQUALIZER/BASS
You can set one of the five preset modes of the
equalizer: FLAT, JAZZ, ROCK, CLASSIC and
POP.
. In a playback mode select the desired
mode, successively pressing the EQ/BBS
button. The following indications will
successively appear on the LCD display:
FLAT, JAZZ, ROCK, CLASSIC and POP.
2. In order to amplify bass signals press and
hold the EQ/BBS button at least for 2
seconds. “X BAS ON’’ will appear on the
LCD display.
To cancel low frequency amplification mode
press the EQ/BBS button again at least for
2 seconds. “X BAS OFF’’ will appear on the
LCD display.
3D SURROUND effect
To switch on 3 D sound effect while listening to
music set the 3D SURROUND button to ON po-
sition. To switch off the effect set the button to
OFF position.
MUTE
To mute sound, press the MUTE button.
Earphones jack
For individual listening to music through the
earphones (not supplied) connect them to the
earphones jack (3, pic. ). Use the VOLUME
or button to adjust volume. The speak-
ers will automatically turn off when headphones
are connected.
USING THE RADIO
This cassette recorder is equipped with electri-
cal digital tuning system. Besides that, you can
tune and store 20 radio stations in each band
FM and MW (AM).
RADIO STATIONS RECEPTION
. Switch on the cassette recorder by pressing
the POWER button.
2. To select the TUNER mode press the
FUNCTION button successively. The
“TUNER’’ indication will appear on the LCD
display.
3. To select FM or MW (AM) band press the
BAND button.
. Tune to the desired radio station.
Manually: to select the desired station
press the SKIP TUNING

or

buttons
successively.
Automatically: Press and hold the SKIP
TUNING

or

button for more than
second, tuner will start scanning and will
stop it automatically when a strong signal
from the radio station is found.
5. Switch the MONO/STEREO mode. If the
stereo signal from FM radio stations is weak,
3966IM.indd 8 07.07.2008 15:40:49