ENGLISH
4
Unscrew the nuts from the screws on the base of the central support of the antenna, remove the
discs. Set the (D) element on the screws, put the discs and screw the screws.
pcs.
4
On the rear side (pic. 4) fasten the (D) element in the mounting seat using the screw
Ø
3x14.
4. Assembling of the reflector holders (pic. 5)
pcs.
5
Connect two parts of the reflector holder by clamping the fastenings (Е).
5. Assembling the reflector (pic. 6)
pcs.
6
Match the deepenings in the reflector pipes with the mounting seat. Slightly press the pipes to fix
in the clamps of the holder.
VT-3855_new.indd 4
18.10.2013 18:50:12
