Vitek VT-3592 BK, Manual Instruction

Page: 5 / 32

ENGLISH
5
4.
Press the button (3) «CLOCK
SET» to confirm the time format,
the “hours” setting symbols will be
flashing on the display (2).
5.
Press the buttons (4) «»
or «PRESET -» to set the current
time in “hours”.
6.
Press the button (3) «CLOCK
SET» to confirm the time in hours,
the “minutes” setting symbols will
be flashing on the display (2).
7.
Press the buttons (4) «»
or «PRESET -» to set the current
time in “minutes”.
8.
To finish time settings press the
button (3) «CLOCK SET».
Note: if no current time setting but-
tons are pressed within 15 seconds,
the clock will switch to default set-
tings.
Alarm actuation time setting
1.
Make sure that the radio is
switched off.
2.
Press and hold down the but-
ton (8) «PROG/ALARM SET», the
flashing “alarm” symbols and time
indications in “hours” will appear
on the display (2).
3.
Press the buttons (4) «»
or «PRESET -» to set the current
time in “hours”.
4.
Press the button (8) «PROG/
ALARM SET» to confirm the
“hours”, the flashing “minutes”
symbols will appear on the dis-
play (2).
5.
Press the buttons (4) «»
or «PRESET -» to set the current
time in “minutes”.
6.
Press the button (8) «PROG/
ALARM SET» to confirm the “min-
utes”, the sound signal symbols
«Buzz» or «Radio» will appear on
the display (2); select the sound
signal type by pressing the buttons
(4) «» or «PRESET -».
7.
To finish the alarm actuation
time setting press the button (8)
«PROG/ALARM SET».
Note:
– in current time mode press the
button (8) «PROG/ALARM SET»
to switch the alarm on, the alarm
symbol will appear on the dis-
play (2).
–
to switch the alarm off press the
button (8) «PROG/ALARM SET»
again, the alarm symbol on the
display (2) will go out.
–
if you select the alarm signal
«Radio», first tune the radio to the
desired radio station and set the
volume level.
Snooze function
During the alarm (radio) signal you
can press the button (1) «SNOOZE/
SLEEP» to switch the alarm off for
9 minutes; the alarm signal will be
repeating until you switch it off by
pressing the button (8) «PROG/
ALARM SET».
Radio switch-off time setting
1.
During the radio operation select
the switch-off time by press-
ing the button (1) «SNOOZE/
SLEEP» repeatedly; the flashing
symbol «SLEEP» and the digital
indications of time left before the
switching off will appear on the
IM VT-3592_105x148.indd 5 07.07.2017 15:28:56