Vitek VT-3459 PK, Manual Instruction

Page: 5 / 44

ENGLISH
5
You can help protect the environment!
Please remember to respect the local regulati-
ons: hand in the non-working electrical
equipments to an appropriate waste disposal
center.
LOCATION OF CONTROLS
TOP VIEW
1. FUNCTION Selector (TAPE/FM/AM/CD)
2. FM Antenna Rod
3. CD Door
4. Handle
5. TUNING Control
6. Volume Control
7. CD Door Open Lid
8. Cassette Control Buttons (PAUSE/
STOPEJECT/FFW/REW/PLAY/RECORD)
FRONT VIEW
9. BACK Button
10. NEXT Button
11. FOLDER UP Button
12. POWER Button
13. LCD Display
14. POWER Indicator
15. PROG. Button
16.
STOP/CLK ADJ. Button
17. / PLAY/PAUSE Button
18. PLAY MODE Button
19. Speaker
20. Built-in Microphone
21. Cassette Door/Compartment
22. Cassette Door Close Position
23. Speaker
REAR VIEW
24. AC Input Socket
25. Headphones
26. Battery Door/Compartment
Headphone Jack
Headphone Jack “PHONES” (25) for head-
phones with 16-32 Ohm impedance (3.5mm
jack). Use corresponding adaptors (Electronics
shops) if you have different plugs. The speakers
are automatically switched off when the head-
phones are being used.
CAUTION!
Listening at high power for long periods of time
can damage users’ ears.
POWER ON/OFF
When power is connected for the first time or if
power supply has been reinstalled:
the LCD display is switched on the following
way:
- Press the POWER (12) button, slide the
FUNCTION selector (1) to your desired
mode (CD, FM, AM or TAPE with Play button
pressed).
- To turn off the power, press the POWER
button (12) or slide the FUNCTION selector
(1) to TAPE position.
BASIC OPERATION
Volume Control
Once the required station has been located,
adjust the VOLUME controls (6) to the desired
level.
LISTENING TO THE RADIO
1. Set the FUNCTION selector (1) to AM or FM
mode.
2. Tune the TUNING control (5) to the desired
station.
3. When finished listening, slide the FUNCTION
selector (1) to TAPE (RADIO/CD OFF)
position.
SETTING THE CLOCK TIME (In Standby
Mode or Tape Mode)
This clock indicates time in 12 or 24 hours.
1. With the clock showing in the display, press
CLK ADJ. button (16) and hold for more than
3 seconds to select 12H or 24H format.
2. Press the NEXT button (10) to set-up
hours. Press the BACK button (9) to set-up
minutes.
3. Press the CLK ADJ. button (16) to confirm
the time setting.
4. If the system is set to 12-hour mode, if it’s
afternoon, the PM icon will be lighted on.
Playing compact disks
1. Press the POWER button to turn on the unit.
2. Set the FUNCTION selector (1) to CD mode.
3. If there is no CD inside or disk is damaged,
the LCD will show “no”.
Loading a disc
1. Lift up the CD door open lid (7) to open the
CD door.
2. Put a disc inside and then close the CD
door. After that, reading TOC will start.
3459PK.indd 5 3459PK.indd 5 07.11.2008 12:42:48 07.11.2008 12:42:48