Vitek vt-3454 bk, Manual Instruction

Page: 7 / 44

ENGLISH
7
3. To store the desired track in memory press the
PROG button. The number of the track while
programming will change to “Р02”
4. Programming of the following track: select
the next track, by pressing the / buttons
or the +10/-10 buttons. Then press the PRO-
GRAM button to store the selected track in
memory. You can program up to 20 tracks
5. To playback programmed tracks press the
PLAY/PAUSE button.
6. To cancel programmed playback press the
STOP button once or open the disc slot lid,
or set the FUNCTION switch to another posi-
tion.
Playback of МР3 files from the disc, USB
drive or SD/MMC card
This unit can playback most of the discs record-
ed in the MP3 format, but there are cases when
the disc is not played back due to the settings of
the software, used while recording of the disc.
1. Switch on the unit. Set the FUNCTION switch
to the CD position.
2. The unit will start reading of the disc automat-
ically.
3. Press the CD/SD/USB button and select the
media type: disc, memory card or USB drive.
4. Insert a МР3 disc in a disc slot, or insert a USB
or a SD card in the corresponding jack. The
reading will start, and then the total number
of tracks will appear on the display.
5. If there is no disc in the disc slot or the disc
is damaged, if a USB is not connected to the
USB jack, or if no card is connected to the
MMC jack, the “no” symbols will appear on
the LCD-display
6. To move to the previous/ next folder, when the
playback is stopped, press the FOLDER UP/
FOLDER DOWN buttons and the +10/-10 but-
tons.
7. Use the / and the +10/-10 buttons to se-
lect the desired track.
8. To playback the selected track press the
PLAY/PAUSE button
9. To pause the playback press the PLAY/PAUSE
button
10.To resume the playback press the PLAY/
PAUSE button again
11.To stop the playback, press the STOP button.
Repeat playback of a track or folder (album)
1. To repeat one track, press the MODE button
once in the CD, USB or SD mode, the current
will be repeated continuously.
2. To repeat all tracks in the folder, press the
MODE button twice, the selected folder will
be repeated continuously.
3. To repeat all folders, press the MODE button
thrice, all folders will be repeated continu-
ously
Random playback
1. To playback all tracks on the disc in a random
order, press the MODE button four times in
the stop mode, the “RDM” symbols will ap-
pear on the LCD-display and the playback of
the tracks in the random order will start.
3454IM.indd 7 3454IM.indd 7 15.09.2010 16:33:19 15.09.2010 16:33:19