Vitek VT-3411 ST, Manual Instruction, Page: 3 / 28

3
ENGLISH
BLENDER SET VT-3411 ST
The blender set is intended for whisking, mixing,
chopping or combined processing of liquid and
solid products.
Description
1. Detachable blender attachment
2. Motor unit
3. Turbo mode button «TURBO»
4. ON button “I”
5. Speed control knob
6. Chopper bowl
7. Chopping knife
8. Geared lid
9. Whisk gear
10. Whisk attachment
11. Measuring cup
Attention!
For additional protection it is reasonable to
install a residual current device (RCD) with
nominal operation current not exceeding
30 mA. To install an RCD, contact a spe-
cialist.
SAFETY MEASURES
Before using the unit, read these instructions
carefully and keep them for future reference. Use
the unit according to its intended purpose only,
as it is stated in this user manual. Mishandling the
unit can lead to its breakage and cause harm to
the user or damage to his/her property.
•
Before connecting the unit to the mains, make
sure that the voltage specified on the unit cor-
responds to your home mains voltage.
•
Never leave the unit connected to the mains
unattended.
• Always unplug the unit before changing the
attachments.
•
Before using the unit make sure that the
attachments are set properly.
• Do not connect the motor unit to the mains
without the attachments.
•
The blender set allows quick and effective
operation, but continuous operation time
should not exceed 1 minute while using
the blender attachment and the whisk and
20-30 seconds while chopping products in
the chopper bowl. Make at least a two-minute
break between operation cycles.
• Before using the unit, cool down hot products,
temperature of products should not exceed
+70°C.
•
It is not allowed to switch the unit on without
attachments and products for processing.
• Do not use the unit outdoors.
•
Do not place the chopper bowl and the mea-
suring cup into a microwave oven.
• Use only the attachments supplied.
• Before using the unit for the first time, thor-
oughly wash all the removable attachments
and containers that will contact food.
• Place the chopper bowl on a flat stable surface.
• Products should be put into the chopper bowl
before the unit is switched on.
•
Do not overfill the chopper bowl with products
and watch the level of liquids.
• The cutting edges of the chopper’s chopping
knife and of the blender attachment are very
sharp and dangerous. Handle these attach-
ments very carefully!
• If rotation of the chopping knife is hindered,
unplug the unit and carefully remove products
that prevent blade rotation.
• Remove products and pour out liquids from
the chopper bowl only after complete stop of
the chopping knife.
•
Do not touch rotating parts of the unit. Do not
let hair or free hanging clothes get into the
rotation area of the blender attachment knife
or whisk.
•
Unplug the unit every time before cleaning or
when you are not using it.
• Unplug the unit by taking the power plug
directly.
•
Do not pull the power cord and do not twist it.
• Do not put the attachments and bowls in a
dishwashing machine.
•
Do not use the unit near hot surfaces (such as
gas or electric stove, oven).
• Provide that the power cord does not touch
sharp edges of furniture and hot surfaces.
•
Do not touch the motor unit body, the power
cord and the plug with wet hands.
• Do not use the unit if the power cord or power
plug is damaged.
•
For children safety reasons do not leave poly-
ethylene bags, used as a packaging, unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• Do not allow children under 8 years of age to
touch the body of the motor unit, the power
cord or the power plug during operation of
the unit.
VT-3411.indd 3 31.10.2017 16:48:28