7
ENGLISH
•
Before cutting hair switch the hair clipper on, mov-
ing the power switch (1) to the position «I» and make
sure that hair clipper operates normally and the
blades move smoothly. If there is excess oil on the
blades, switch the hair clipper off setting the power
switch (1) to the position «O» and remove the exces-
sive oil with a dry cloth.
•
Constantly check the power cord, prevent it from
multiple twisting, regularly switch the unit off and
straighten the power cord (5).
•
Seat a person so that his/her head is approximately
at your eye level, cover the person’s shoulders with
a towel and set hair with the comb.
Reminder
–
Cut off a small amount of hair at a time – if neces-
sary you can always return to the cut area of hair for
additional cutting.
–
The best haircutting results are reached on dry hair,
not wet.
–
Comb the hair with a comb (11) to reveal uneven
locks.
–
It is better to leave longer hair after cutting for the
first time.
–
After learning your clipper better, you will be able to
arrange your hair in any style you need.
Attachment combs
The cut-off hair length depends on the attachment
comb:
–
attachment comb (6): length of hair 3 mm
–
attachment comb (7): length of hair 6 mm
–
attachment comb (8): length of hair 9 mm
–
attachment comb (9): length of hair 12 mm
Install the selected attachment comb on the blades,
teeth up, and press on the ledge in the bottom part of
the attachment until locking. Before cutting hair make
sure that the attachment is locked on its installation
place. To remove the attachment comb press the clamp
and remove the attachment.
IM VT-2569_70x130.indd 7
24.12.2018 12:23:14
