7
ENGLISH
–
After you finish using the unit, set the switch (4) to the
position «0»; if the unit is powered by the power cord (8),
unplug it.
Note:
–
Always switch the trimmer off during the breaks in opera-
tion.
–
If the trimmer is cord-operated, remove the power plug
from the mains.
Cutting beard and mustache
Use the telescopic attachment position (1) «1-10» for beard
styling depending on the remaining hair length. Adjust the
attachment (1) position by turning the control knob (3) (pic. 3).
–
Until you learn your trimmer better, set the attachment (1)
to the positions with maximal remaining hair length «7-10»
and gradually switch the attachment to less remaining hair
length «7 and less» .
–
To cut the beard symmetrically start cutting from the chin
upwards, cut the beard (pic. 7).
–
Periodically clean the attachment (1) off the cut hair (pic. 8).
–
When cutting mustache, first comb them and start cutting
from the middle to the corners of the lips.
Note: Always cut off a little amount of hair at a time; if necessary
you can always return to the cut area again for additional cutting.
–
In the final stage of beard cutting remove the telescopic
attachment (1) from the unit, turn the blades of the unit
towards yourself and, pressing the trimmer slightly, define
the desired shape of the beard (pic. 9).
–
Do not press the trimmer strongly, there is danger of injuries
or cuts when open blades come in contact with skin.
–
When cutting hair on the cheeks, move the trimmer down-
wards; move the trimmer upwards on the neck.
–
After you have cut the beard and mustache, maintain their
form.
Reminder
–
Always cut off a small amount of hair at a time – if neces-
sary you can always return to the cut area again for addi-
tional cutting.
–
The best haircutting results are reached on dry hair, not wet.
–
Comb the hair to reveal uneven locks.
–
It is better to leave longer hair after cutting for the first time.
–
After learning the unit better, you will be able to arrange your
hair in any style you need.
–
Before removing the attachment (1) switch the trimmer
off, and if the trimmer is cord-operated, disconnect the
power plug from the mains.
CLEANING AND CARE
–
Switch the trimmer off after use.
–
Remove the attachment (1) (pic. 4).
IM VT-2553_70x130.indd 7
15.08.2017 14:09:51
