6
ENGLISH
•
After you finish using the unit, switch the unit off
by setting the switch (3) to the position «OFF».
•
Use the trimmer only for cutting hair in the
ears and nose.
Cleaning and care
•
Switch the unit off after the use.
•
Remove the used trimmer and attachments
from the unit body and clean the inside and
outside of the attachments from the cut hair,
using the cleaning brush (7).
•
You can wash the comb attachments (10, 12)
under a water jet, then wipe them and dry
thoroughly.
•
Do not use solvents or abrasives to clean the
unit body, trimmers and attachments.
Lubricating the trimmer blades (9, 11, 13)
Regularly lubricate the blades using the oil (8)
supplied with the unit.
•
Apply one or two drops of oil on the blade
teeth and the back part of the upper blade.
•
Install each trimmer on the unit body and
switch the unit on, make sure that the blades
are moving smoothly.
•
Switch the unit off, remove excess oil with a
dry cloth.
Note:
The trimmer for nose and ears (14)
doesn’t require lubricating.
Attention!
Use only the oil supplied with the
unit.
DO NOT USE vegetable oil, fat, oil mixed with any
solvents for lubricating.
Solvents will evaporate, leaving thick grease that
may slow down the blades motion.
Taking care for the shaving
attachment (15)
Regular cleaning helps to maintain the shaving
system in good and operable condition.
•
Press the buttons (17) simultaneously and
remove the outer shaving block (16) (pic. 7).
•
Use the brush (7) to clean the outer and inner
shaving blocks from inside and outside.
•
Install the outer shaving block back to its
place.
Storage
•
Clean the unit and lubricate the blades of the
trimmers with lubricating oil before taking the
unit away for storage.
•
Keep the unit away from children in a dry cool
place.
Delivery set
1.
Unit body – 1 pc.
2.
Wide trimmer 30 mm – 1 pc.
3.
Telescopic attachment for 30 mm trimmer–
1 pc.
4.
Wide trimmer 40 mm – 1 pc.
5.
Attachment for 40 mm trimmer– 4 pc.
6.
Detail trimmer for removing short hair –
1 pc.
7.
Nose and ears trimmer – 1 pc.
8.
Shaving attachment – 1 pc.
9.
Power adapter
10.
Storing/charging base – 1 pc.
11.
Lubricating oil – 1 pc.
12.
Cleaning brush – 1 pc.
13.
Instruction manual – 1 pc.
14.
Pouch – 1pc.
TECHNICAL SPECIFICATIONS
Input voltage of the power adapter:
AC (alternating current) 100-240 V ~ 50/60 Hz
Output voltage: DC (direct current) 3 V, 0.6 A
Maximal power consumption: 6 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
VT-2544.indd 6
09.01.2014 10:30:27
