Vitek VT-2286, Manual Instruction

Page: 5 / 44

5
ENGLISH
• Do not wrap the power cord around the body of the
device, and do not store the device by hanging it by its
power cord. It may damage the power cord.
• It is recommended to unwind the power cord to its full
length while using the unit.
• The power cord may not:
– touch hot objects,
– run over sharp edges,
– be used as a handle for carrying the unit.
• Check the integrity of the power cord periodically.
• Do not use the unit if the power plug or the power cord
is damaged, if the unit works improperly and after it
was dropped.
•
If the power cord is damaged, it should be replaced by
the manufacturer, service or similar qualified personnel
to avoid danger.
• Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center at the contact addresses
given in the warranty certificate and on the website
www.vitek.ru.
• To avoid damages, transport the unit in the original
package only.
• Keep the unit in a dry cool place out of reach of children
and disabled persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature
before switching on.
•
Unpack the unit completely and remove any packaging
materials that can prevent the unit operation.
•
Unwind the power cord to its full length.
• Check the unit for damages, do not use it in case of
damages.
• Before plugging the unit in make sure that the operat-
ing voltage of the unit corresponds to the voltage of
your mains.