Vitek VT-2194, Manual Instruction

Page: 5 / 26

5
ENGLISH
•
In this case immediately set the switch (5) to the
«
0 » position (the unit is switched off).
•
Remove the power plug from the mains socket.
• Make sure that the openings on the body are not
blocked and nothing prevents free air flow.
• Let the unit cool down for approximately 20 min-
utes before switching it on again.
• Plug the unit in, switch it on using the switch (5),
set the heating temperature by turning the tem-
perature control knob (4).
•
The unit is also equipped with an automatic
switch that switches the unit off when it is
dropped or considerably tilted. When the
unit is back in the vertical position, it will be
switched on.
• If the unit is not switched on, it may mean that
there are other damages in the convector. In
this case contact an authorized service center
to repair the unit.
CLEANING AND CARE
• Before cleaning disconnect the unit from the
mains and let it cool down.
• Clean the unit regularly to avoid dust accumu-
lation.
• Wipe the outer surface of the unit with a damp
cloth. Do not use abrasive substances to
remove dirt.
•
Do not immerse the convector in water or any
other liquids. Provide that water does not get
into the unit body to avoid electric shock.
• To clean the grids of the unit, use a vacuum
cleaner with a corresponding attachment.
• Keep the unit out of reach of children and dis-
abled persons.
DELIVERY SET
Convector – 1 pc.
Support plates with wheels – 2 pcs.
Screws for plates fastening – 8 pcs.
Dowels for wall mounting – 2 pcs.
Screws for wall mounting – 2 pcs.
Instruction manual – 1 pc.
Warranty certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 230 V ~ 50 Hz
Rated input power: 1200-1500 W
Heating area: 20 sq m
RECYCLING
For environment protection do not throw out the unit
and the batteries (if included), do not discard the
unit and the batteries with usual household waste
after the service life expiration; apply to specialized
centers for further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this prod-
uct apply to a local municipal administration, a dis-
posal service or to the shop where you purchased
this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru for
receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.