Vitek VT-1511, Manual Instruction, Page: 4 / 60

4
ENGLISH
PREPARATIONS BEFORE OPERATION
• Make sure that all functional buttons (13,
14, 17) are in the off position.
• To make sure that the steam supply is
blocked, turn the handle (5) clockwise till
the clamp.
• Before using the unit for the first time,
wash all removable parts with warm wa-
ter and wipe them with a dry cloth.
• Before switching on the unit, make sure
that voltage of your home electric main
corresponds to the voltage specified on
the unit.
• Remove the tank (3), fill it with cold water
till the MAX mark and place on its place.
• Insert the filter (6) into the holder (12), by
matching the ledge on the filter (6) with
the hole on the holder (12) and turn the
filter (6) clockwise/anticlockwise.
• Place the filter holder into the coffee
maker. Holder ledges (12) should match
the groves on the boiler, and then turn
the filter holder handle (8) to the right till
the clamp.
• Place the corresponding cup on the cov-
er of the tray (10).
• Inset the plug into the socket.
• Switch on the unit by pressing the ON/
OFF (17) button, the indicator (16) will
light up.
• To fill the boiler with water press the (13)
button in 15-20 seconds or when water
starts appearing in the cup, switch off
water supply, by pressing the (13) button
once again.
• Wait till the indicator (15) lights up, then
switch on water supply, by pressing the
(13) button, when the cup is filled with
water, press the (13) button once again
to switch off water supply, pour out water
from the cup. Depending on the cup size,
repeat this procedure several times, then
the boiler will be washed.
Attention!
- Do not remove the filter holder (12) if the
(13), (14) buttons are pressed
- Do not remove the filter holder (12) im-
mediately after preparing coffee as
there is redundant water vapor pressure
inside, let the coffee maker cool down
completely.
- To remove the filter holder (12) turn the
handle to the left and remove the holder.
MAKING ESPRESSO
• Make sure that all functional buttons (13,
14, 17) are in the off position.
• To make sure that the steam supply is
blocked, turn the handle (5) clockwise till
the clamp.
• Remove the tank (3), fill it with cold water
till the MAX mark and place on its place.
• Insert the filter (6 or 19) into the holder
(12), by matching the ledge on the filter
(6) with the grove on the holder (12) and
turn the filter (6) clockwise/anticlock-
wise.
• Fill the filter (6) with the ground coffee:
2 full measuring spoons – to make two
coffee cups and 1 full spoon - to make
one coffee cup, slightly tamp the ground
coffee by the back side of the measuring
spoon (18).
• Place the filter holder into the coffee
maker. Holder ledges (12) should match
the groves on the boiler, and then turn
the filter holder handle (8) to the right till
the clamp.
• Put one or two cups on the tray lid (10).
• Inset the plug into the socket.
• Switch on the unit by pressing the ON/
OFF (17) button, the indicator (16) will
light up.
• Wait till the indicator (15) lights up, the
unit is ready for making coffee.
• Switch on water supply, by pressing the
(13) button; watch the process of the cup
filling with coffee, press the (13) button
once again to switch off water supply.
• Switch off the coffee maker by pressing
the (17) ON/OFF button, the indicator
(16) will go out.
4
VT-1511 IM.indd 4 12.04.2012 10:08:22
www.101kofemashina.ru - обзоры , отзывы , характеристики , инструкции , акции и цены
www.101kofemashina.ru помогает выбирать кофейную технику с 2010 г .