Vitek VT-1450, Manual Instruction, Page: 4 / 40

4
ENGLISH
•
Do not touch the rotating parts of the unit. Do not let
hair or free hanging clothes get into the rotation area
of the blender attachment knife.
•
Unplug the unit every time before cleaning or when
you are not using it.
•
Unplug the unit by taking the power plug directly.
•
Do not pull the power cord and do not twist it.
•
Do not wash the attachment in a dishwashing machine.
•
Do not use the unit near hot surfaces (such as gas or
electric stove, oven).
•
Provide that the power cord does not touch sharp
edges of furniture and hot surfaces.
•
Do not touch the motor unit body, the power cord and
the plug with wet hands.
•
Do not use the unit if the power cord or the power
plug is damaged.
•
For children safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with polyeth-
ylene bags or packaging film. Danger of suffocation!
•
Do not allow children to touch the body of the motor
unit, the power cord or the power plug during opera-
tion of the unit.
•
Do not leave children unattended to avoid them using
the unit as a toy.
•
During the unit’s operation and breaks between oper-
ation cycles, place the unit out of reach of children.
•
The unit is not intended to be used by people with
physical, sensory or mental disabilities (including
children) or by persons lacking experience or knowl-
edge if they are not under supervision of a person
who is responsible for their safety or if they are not
instructed by this person on the usage of the unit.
• Close supervision is necessary when children or dis-
abled persons are near the operating unit.
•
This unit is not intended for usage by children.
•
To avoid risk of electric shock or fire, do not immerse the
unit body, the power cord and the power plug into water
or any other liquids. If the unit is dropped into water:
– do not touch the water;
– unplug the unit immediately, only after that you
may take the unit out of water;
– apply to the authorized service center for testing
or repairing the unit.