ENGLISH
6
Divide your hair into locks, start straight-
ening from lower layers. Using a plain
or a round brush, brush the hair down-
wards and simultaneously direct hot air
from the nozzle (4) at your hair. This way,
slowly straighten each hair lock from
root to end. After you finish straighten-
ing the lower locks, start straightening
the locks of the middle layer and finish
with locks of the upper hair layer.
Natural wavy hairstyle
Set the switch (2) to the low heating posi-
tion « »; select the low air supply speed
by setting the switch (1) into position
«
». Grip locks between fingers
tightly, turn them in the direction of
natural curling. Dry your hair, directing
the airflow between fingers. When the
required effect is achieved, press and
hold down the cool shot button (3) and
fix each lock.
Styling
Attach the nozzle (4) to the hairdryer
and then set the switches (1, 2) to
the low heating/low speed positions
« »/« ».
Divide your hair into locks and create
a required hair style by means of a
round hair-styling brush. During hair
styling, direct the air flow straight at
your hair. If you want to fix the hair-
style, direct the cool air flow at each
lock for 2-5 seconds. Styling time
is determined individually accord-
ing to hair type; you can adjust it by
yourself.
Overheating protection
Overheating protection switches the
hairdryer off if the outgoing air is too
hot. If the hairdryer has been switched
off during operation, set the switch (1)
to the «0» position, unplug the haird-
ryer and make sure that the inlets and
outlets are unblocked. Let the haird-
ryer cool down for 5-10 minutes and
switch it on again. Do not block the air
inlets during unit operation and avoid
getting of hair into its air inlet.
Cleaning and care
–
The hairdryer is intended for
household usage only.
–
Set the switch (1) to the «0» posi-
tion and disconnect the hairdryer
from the mains.
–
Wipe the unit body with a damp
cloth and then wipe it dry.
–
Turn the air inlet grid (5) coun-
terclockwise and remove it from
the unit body. Clean the grid with
a brush and install the grid to its
place.
–
Never immerse the unit into water
or other liquids.
–
Do not use abrasives and solvents
to clean the unit body.
STORAGE
–
Unplug the hairdryer if you are not
using it.
–
Let the hairdryer cool down after
use, keep the unit in a dry cool
place, out of reach of children.
–
Never wind the power cord around
the hairdryer, as this can dam-
age the cord. Handle the power
cord with care, do not pull, twist
or stretch it, especially near the
power plug or at the junction point.
Periodically straighten the cord if it
gets twisted.
VT-1309_105 x148.indd 6
20.10.2017 16:22:39