ENGLISH
5
•
Do not attempt to repair the unit.
Do not disassemble the unit by
yourself, if any malfunction is
detected or after it was dropped,
unplug the unit and apply to any
authorized service center at the
contact addresses given in the
warranty certificate and on the
website www.vitek.ru.
•
To avoid damages, transport the
unit in the original package only.
•
Keep the unit in a dry cool place
out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR
HOUSEHOLD USE ONLY, ITS
COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK
SPACES IS PROHIBITED.
USING THE HAIRDRYER
After unit transportation or stor-
age under cold (winter) conditions,
it is necessary to keep it for at
least 3 hours at room temperature
before switching on.
–
Before switching the unit on, make
sure that your home mains voltage
corresponds to the unit’s operat-
ing voltage.
–
Remove any stickers that can pre-
vent unit operation.
–
Unwind the power cord completely.
–
Insert the power plug into the
mains socket.
–
Use the switch (1) to set the
required air supply speed:
«0» – the hairdryer is off;
« » – low speed;
«
» – high speed.
–
Set the required air flow tempera-
ture using the switch (2):
« »– low heating;
« » – medium heating;
« » – maximal heating.
Note: During the first operation
some foreign smell and a small
amount of smoke from the heating
element is possible, this is normal.
–
This model has a “cool” air supply
function, use it to fix your hairstyle.
For «cool» air supply, switch the
hairdryer on and then press and
hold down the button (3) «
».
Hair care
To get the best results, wash your
hair with shampoo, remove excessive
moisture with a towel, comb your hair,
then start drying and styling it.
Quick drying
Set the switch (2) to the maximum
heating position «
», select the
required air supply speed using the
switch (1) and dry your hair. Shake off
excessive moisture from the hair with
your hand or a comb and constantly
move the hairdryer above your hair.
Straightening
Set the switch (2) to the maximal heat-
ing position «
», select the required
air supply speed using the switch (1)
and preliminarily dry the hair. When
the hair is almost dry, switch the unit
off, set the concentrator nozzle (4),
decrease the heating degree using the
switch (2) and decrease the air supply
speed using the switch (1).
VT-1309_105 x148.indd 5
20.10.2017 16:22:39