background image

8

9

 *Please research local, state and federal laws regarding the implementation of audio 

surveillance.

Image Sensor
Image Size
Electronic Shutter 
Min. Illumination
Lens
Day/Night
IR LEDs / IR Type 
IR Distance
Video Compression
Audio Compression
Resolution
DNR
Quality
Image Setting
Analytics
Smart Alarm
Alarm In / Alarm Out
ROI 
Network
Security Measures
Network Protocols
Audio
Storage Card Slot
Remote Viewing
RS 485
Supported Browsers
Connection Protocol
Weather / Impact Resistance Rating
Power
Working Environment
Dimensions / Weight

4 ×  1/1.8” 4.0 Megapixel Progressive Scan CMOS

16 MegaPixel - 5520x2400

1s -1 / 10,000s (Auto / Manual) 

Color: 0.008Lux @ (F2.0  AGC ON)  B/W: 0.001Lux @(F2.0  AGC ON), 0 Lux with IR

4.5mm Fixed Iris Lens × 4

True Day / Night by ICR

8 / Smart IRs 

80’ w/ 180 Degree Array

 

H.265 / H.264 / MJPEG

G.711A / G.711U

5520 × 2400, 3840 × 1680, 2784 × 1200 (30/25fps)

XD-DNR (2D-DNR & 3D-DNR)

VBR (Five Levels of Adjustment) / CBR (Adjustable)

Flip, Mirror, Saturation, Brightness, Contrast, Sharpness, AGC, and AWB adjusted by client software/browser

Line Crossing, Region Entrance / Exit

SD Card Record, Triggering Record, Notify Control Center, Uploading SD Card, Sending e-mail

1 / 1

Each ROI to be Configured Separately

RJ45 10M / 100M Ethernet Port, PoE (802.3af)

User Authentication, Host Authentication (MAC address); HTTPs encryption; IEEE802.1x Port-based Network Access Control; IP Address Filtering

HTTP, HTTPs, IPv4/IPv6, 802.1x, QoS, FTP, SMTP, UPnP, SNMP, DNS, DONS, NTP, RTSP, RTCP, RTP, TCP/IP, UDP, IGMP, ICMP, PPPoE, DHCP

1 x IN & 1 x OUT (Two-Way Audio)
Supports One MicroSD up to 256GB

CMS / Web Browser / Mobile (iOS / Android)

1 CH; Pelco-D/P Protocol, Custom Protocols Available

Internet Explorer 8-11, Edge in IE Mode

ONVIF, API, SDK

IP67 / IK10

12VDC / PoE (802.3af)

-22

°

~140 (30

°

C ~ 60

°

C) / <95% Humidity

11.35” × 6.29 ” × 5.24” (288.4mm × 159.7mm × 137.7m) Length × Width / 74 oz. (4.62 lbs.) (2.1kg)

VT-TNB16X4MS Specifications        

Summary of Contents for Transcendent VTC-TNB16X4MS













Reviews: