3
Installation
**Before beginning installation, make
sure that the wall or ceiling is strong
enough to withstand 3 times the weight
of the camera. The mounting
steps are as follows:
1.
Attach the drill template to the place
where you want to install the camera,
then drill 3 screw holes and 1 cable
hole (if you want to route the cables
through the mounting base) according
to the drill template (see below right).
First Install a MicroSD Card as
Demonstrated in Diagram at Right
2. Route and connect relevant cables
then attach the mounting base to the
wall with the provided screws.
Connecting Alarm Input / Output
Weather Resistant Network Coupler
1. Loosen the nut from the Weather Resistant Network Coupler,
2. Run ethernet cable through coupler, then attach a RJ-45 connector.
3. Tighten the nut and coupler for a weather resistant seal.
