background image

VITEK

VITEK

 

VTC-TNB16X4MS 

Transcendent Series  

16 MegaPixel 180°  

Multi-Sensor “Peri-Cam” Camera

QUICK START GUIDE

FEATURES:

• Four 1/1.8” 4.0 MegaPixel Progressive Scan CMOS Image Sensors
• Resolution of up to 5520 x 2400
• 4 x 4.5mm Fixed Lens
• 1s~1/10,000s; Auto/Manual Electronic Shutter 
• 8 IR LEDs, up to 75’ IR Range (with 180° Array)
• Digital Wide Dynamic Range (D-WDR)
• Analytics including: Line Crossing, Region Entrance / Exit
•  True Mechanical Day/Night function by ICR
•  XD-DNR (2D & 3D-DNR) Noise Reduction
•  Field of View Capacity: Pan (180°), Tilt (80°)
•  Smart H.265/H.264/MJPEG Triple Streaming
•  Single IP Address Input Required
•  Remote View via CMS, IE, iOS & Android Apps
•  ONVIF Compliant
•  MicroSD Memory Card Slot for Local Recording (up to 256GB)
•  IP67 Weather Resistance 
•  Two-way Audio*, 1 Ch. Alarm In + Out, CVBS
•  12VDC & PoE+ (Power over Ethernet) Operation
•  VT-TJB010 J-Box Included, and Universal Corner and Pole Mount Adapters Available
  

 [See Page 9]

•  3-Year Warranty

*Please research local, state and federal laws regarding the implementation of audio surveillance.

PLEASE NOTE: 

Complete User Guide, Software, Tools, and Updates are 

available online.  Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

16MP

*Shown with Included J-Box VT-TJB010

Summary of Contents for Transcendent VTC-TNB16X4MS













Reviews: