7
It is recommended to clean the
shaving heads once every two
months (Pic. 6, 7, 8)
- Turn off the electric shaver.
- Press the locking button (5).
- Pull up on and remove the shaving
block.
- Turn the ring counter-clockwise and
remove the locking frame.
- Remove and clean the shaving
heads (separately rotating and non-
moving blades). Do not confuse the
rotating and non-moving blades.
This is important because the rotat-
ing and non-moving blades of each
head adjust to one-another, which
guarantees the optimal operating
characteristics of each pair of
blades.
If you accidentally confuse a blade
block, it may take several weeks to
restore optimal shaving characteris-
tics.
- Clean the rotating blade with the
brush. Use the side of the brush
with the short bristles.
- Clean the non-moving blades with
the brush.
- Replace the shaving heads onto the
shaving block, install the locking
frame and turn the ring clockwise.
- Turn the non-moving blades clock-
wise/counter-clockwise to lock
their plastic frame.
- Re-install the shaving block onto
the shaver.
Trimmer
- Clean the trimmer after each use.
- Turn off the electric shaver.
- Clean the trimmer using the brush
(10) included in the package.
- Apply drops of sewing machine or
hair clipper oil to the trimmer every
six months.
Replacing the shaving heads (Pic.
6, 7, 8)
To achieve optimal results from your
shaver, replace the shaving blocks
every 2 years.
- Turn off the electric shaver.
- Press the locking button (5) and
remove the shaving block.
- Turn the ring counter-clockwise and
remove the locking frame.
- Replace the shaving heads, install
the locking frame and turn the ring
clockwise.
- Turn the non-moving blades clock-
wise/counter-clockwise to lock
their plastic frame.
- Re-install the shaving block onto
the shaver.
PROTECTING THE ENVIRONMENT
This shaver contains rechargeable
batteries. Before disposing of the
expired electric shaver, remove the
batteries and dispose of them accord-
ing to the laws of your country for dis-
posal of harmful waste.
Do not throw the shaver away until you
remove the built-in rechargeable bat-
teries.
WARNINGS
Do not charge the batteries in
places where the temperature is
lower than 0°Ñ or higher than 40°Ñ,
or they are exposed to direct sun-
light, near heat sources or places
with high levels of humidity.
Only use the charging device that
came with the shaver.
Keep the charger away from water
ENGLISH
Vt-1374.qxd 24.01.05 12:47 Page 7
Summary of Contents for Fast Action VT-1374
