Vitek CHRONO VT-CN1680, Manual, Page: 29 / 68

CHRONO Series DVR
28
Note
: Use ID/Password registered in DDNS.
2-5-3. MENU > NETWORK > Notification
In Callback, set up the IP addresses of client sites so that Events detected in the local
system can simultaneously notify multiple client sites. Enter IP addresses of client sites
to receive event notifications on remote sites. Press
to pop up the virtual keyboard.
Callback Interval : Select Callback Interval to set time interval between consequential
events being sent to remote site.
Note : Any events that occur between the pre-set interval times will not be sent to a
remote site. E.g. If the interval is set as 30 seconds, only the events that occur every
30 seconds, since the first event, will be sent to a remote site.
In Email, Events can notify an individual’s email address by text message.
E-Mail Interval : Select E-Mail Interval to set the time interval between consequential events being sent to remote site via email.
Recipient : Enter the email address of a recipient. Up to 5 recipients can be entered.
Note
: Any events that occur between the pre-set interval time will not be sent to remote site. E.g. If the interval is set as 30
seconds, only the events that occur every 30 seconds since the first event will be sent to a remote site via email.
SMTP Server : Enter SMTP server using the virtual keyboard. SMTP server information can be obtained from a system administrator.
Sender : Enter the address/name where the email is being sent from.
SSL/TLS : Check SSL/TLS to send an email via an SMTP server requiring SSL authentication.
2-5-4. MENU > NETWORK > Transmission
In Transmission, Network transmission can be controlled with IPS and bandwidth.
Note : Max. IPS on Network transmission is 120ips@16ch-DVR and 60ips@8ch-
DVR.(NTSC)