Vitek CHRONO VT-CN1680, Manual, Page: 28 / 68

CHRONO Series DVR
27
Note : approximate size for each resolution – CIF: 360X240, Half D1: 720x240, D1: 720x480
In Recording Status, current recording options and status are displayed.
2-5. NETWORK
Under Network menu, Network configuration options for network Address, DDNS, Remote Notification and Transmission can be set up.
2-5-1. MENU > NETWORK > Address
In Address, Information such as Type, IP address, Subnet Mask, Gateway Port and DNS can be set for network connections.
Type : Select the type of network configuration from: Static IP, DHCP and ADSL (with PPPoE).
IP Address : Enter IP address using button.
Subnet Mask : Enter Subnet Mask using button.
Gateway : Enter Gateway using button.
DNS : Set up the IP address of the DNS server. If you set up the DNS Server, the domain name of the DVRNS server instead of the
IP address can be used during the DVRNS Server setup.
In Port, Select appropriate port number for external access to the system.
The port list shows necessary ports to be opened for each operation.
Note
: ID and Password are required in ADSL (with PPPoE) type.
Note
: Default TCP port is 10101 but it can be set from 1500 to 32000 if necessary.
2-5-2. MENU > NETWORK > DDNS
In the DDNS, network options for DDNS can be selected.
DDNS : Dynamic Domain Name Server allows dynamic network connections.
Note
: “dvr-ddns.com” and “www.dyndns.org” offer free registrations for DDNS service.
Please refer to the appendix for DDNS set up page.
Host Name : Name the DVR or site where it is located using the virtual keyboard by
pressing .
ID/Password : ID and Password are required for Authentication.