How can I connect to the FS-Hxx web interface?
By default, FS-Hxx network is configured in AdHoc mode: FS-Hxx creates a Wi-Fi network called FS-Hxx-XXXX. To connect to this
network:
- Switch on the Wi-Fi on your PC / Mac or mobile device and search for the available networks.
- Select the network called FS-Hxx-XXXX to connect to it.
MAC
PC
iOS (iPhone/iPad/iPod)
- Once connected to the network, type in your web browser the address
- By default, the web interface has no login/password, just leave blank the login/password text box and click the Login button.
I cannot connect to my FS-Hxx in AdHoc mode (direct connection)?
It is possible that the Wi-FI channel used by FS-Hxx Wi-FI adaptor is busy. It is possible to switch of channel by doing the following:
Go to the “Network Settings” menu then switch the Wi-Fi channel number. On next reboot, the Wi-Fi channel used will be different.
Important: No client must be connected to the FS-Hxx otherwise che channel change will not be applied on next reboot.
How do you configure the network settings?
Access the FS-Hxx web interface as indicated above and select the “System Preferences” page.
In the “Network Settings”, you can connect to an existing Wi-Fi network (protected or not) or change the network name of the
AdHoc network created by the FS-Hxx unit. Aplly the changes with the “Save Changes” button.
Settings will be applied on next reboot.
If the unit is not properly configured and access to the unit is no longer possible, refer to the “I cannot connect to my FS-Hxx over
Wi-Fi anymore. How can I reset the network configuration?” question below.
What are the default login and password for the web interface?
By default, login and password are empty. To access the web interface, just click the Login button.
Where can I find the IP address of my recorder?
You can find the IP address using the following shortcut: in STOP mode, press and hold the OK button: the battery level will be
displayed. Press the OK button three times to display the IP address.
Network settings can be found under the NETWORK menu.
I cannot connect to my FS-Hxx over Wi-Fi anymore. How can I reset the network configuration?
To restore the default network configuration, access the NETWORK SETTING menu and select RESET TO DEFAULT. On next reboot,
FS-Hxx-XXXX network will be available. Repeat steps from the “How can I connect to the FS-Hxx web interface?” question above to
connect to a private network.
