MGW Diamond
Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6
51
To set KLV Input over SDI:
Figure 4-12: The KLV Input-SDI (Sync) tab window
Click the
SDI (Sync)
tab and set the following parameters:
Parameter
Description
Message ID
(for
future use)
Enter message ID number.
Message ID allows you to select specific channels / MIDs within the
received KLV data. To capture all the KLV data received, enter '
0
'. To
capture a specific set of Message ID, a comma must be used between the
Message ID to be captured (for example: 1,5,7).
Bitrate (bps):
Enter the maximal bitrate of the KLV data stream.
Define the allocated bitrate to KLV within the total stream bitrate set. It
corresponds to the KLV data after TS multiplexing.
This bitrate must be tuned for each particular KLV source
connected.
NOTE:
When streaming at low bitrate (for example 500kb/s), the default KLV bitrate value (200kb/s) becomes dominant. Ensure to
set an appropriate value matching the actual KLV bitrate of its source. This will ensure that video bitrate is preserved
resulting in a better video quality.
