40
Error codes
When a flashing symbol appears
, it means an error code. Corresponding number
displayed in the rear control module display represents the malfunction.
Error codes Cause of failure
Solution
E0002
Left engine malfunction
Contact the manufacturer's service.
E0004
Left engine malfunction
Contact the manufacturer's service.
E0008
Left motor current detection
error
Contact the manufacturer's service to
replace the controller.
E0010
Left motor current detection
error
Contact the manufacturer's service to
replace the controller.
WARNING: When charging, ensure that there is adequate ventilation and heat
removal through the battery and charger.
WARNING: Any "serious incident" related to the device must be reported to the
manufacturer and to the competent authority of the Member State in which
the user or patient resides.
WARNING: To avoid the risk of electric shock, the device must only be connected
to a supply mains with protective earth.
Battery charging
Proper connection of battery cables to the control
module.
The charger does not come with the wheelchair and is an external charger. To charge
the battery, connect the charger to the charging socket on the front control module.
The charging port is located under the front control
module.
