5
When using the coaxial cable to connect the Base Unit and TV set, make sure
1) the coaxial cable is connected with the Base Unit and TV set properly
2) the Audio input mode switch on the Base Unit is switched into “ Coaxial
audio input”.
No sound is produced from the
headset while the Red indicator
of the PAE-200 Handset is solid
on and the wireless connection
is normal.
No audio signal from the Base Unit or TV
The PAE-200 Handset and the Base Unit are out of
the 10 meters operation range.
The auto-connection dose NOT work when the
PAE-200 Handset color and the “VitaSound”
trademark color on the Base Unit are different.
Auto-connection between the
PAE-200 Handset and the Base
Unit is not working
Make sure the PAE-200 Handset is within a range of 10 meters from the
Base Unit.
Make sure the PAE-200 Handset color and the “VitaSound” trademark
color on the Base Unit are the same before use.
11
1) Turn off one Base Unit is not in use, or
2) Keep the distance between each Unit more than 5 meters
Signal interference occurs
More than 1 Base Unit are installed in 5 meters
10
13
Symptom
Possible Cause
Possible Corrective Action
Page
