11/16/2018
07560
file:///C:/Users/lcapamagian/Downloads/Vitalograph%20lung%20monitor%20bt%20-%20User%20Training%20Manual.html
7/19
If the subject experiences dizziness or fatigue during the test session, wait until this passes before
blowing again or terminate the session.
4.4. Reviewing Previous Results
The Vitalograph lung monitor can store up to 200 test sessions. In order to view previously
performed test sessions, follow these steps:
1. Turn the device on, .
2. When the device is ready for a test ( ), press the
button for approximately 3 seconds.
3. The most recent test session will now be displayed. The best FEV1 result will be displayed
for approximately 3 seconds, followed by the best FEV6 result. The session number ‘1’ is
also displayed, this is the latest session.
4. Earlier test sessions can also be viewed. Pressing the button once will show ‘2’ the
previous test, and so on.
5. Press
. The device will return to the test screen.
4.5. Deleting All Results History
Caution:
Once the history has been deleted it cannot be recovered.
To delete the history entirely, i.e. all previously stored session results, follow these steps:
1. Turn the device on, .
2. When the device is ready for a test ( ), press the and
buttons simultaneously for
approximately 10 seconds.
3. A long beep will indicate success and the device will return to the test screen.
4.6. Sending Test Results to Vitalograph Reports
The test session may be transmitted to the Vitalograph Reports Utility on your PC where it can be
stored as a PDF file and viewed or printed.
Before you can transmit you must first have the Vitalograph Reports Utility installed and running on
your PC. If the ‘Snake V’ icon is showing in your PC System Tray then the utility is running, if not
refer to Vitalograph Reports Utility instructions.
1. Ensure the Vitalograph lung monitor BT device is powered on.
2. On Vitalograph Reports ensure ‘Vitalograph lung monitor’ is selected as the device. Ensure
that ‘Connect using Bluetooth’ tick box is ticked.
3. Click on the ‘Discover Bluetooth Devices’ button. The Vitalograph lung monitor BT device will
be found and saved for future use.
4. There are two ways to print the test results from the lung monitor:
a. When the device is ready for a test ( ), press the button for 3 seconds on the
device will show the Report icon ( ).
