![background image](http://html.mh-extra.com/html/vitalmaxx/04391/04391_instruction-manual_1034472011.webp)
11
EN
Intended Use
• The device is intended for massaging your neck / shoulders / back, buttocks / lumbar
region and legs and is used for relaxation. It is not a replacement for medically
required treatment.
• The device should
not
be used before going to bed. The massage has a stimulating
effect, which may lead to problems getting to sleep.
• The device is not designed to be operated with an external timer or a separate remote
control system.
• The device is for personal use only and is not intended for commercial applications.
• The device should only be used as described in these instructions. Any other use is
deemed to be improper.
• The following are excluded from the warranty: all defects caused by improper
handling, damage or unauthorised attempts at repair. This also applies to normal
wear and tear.
Safety Instructions
■
This device should not be used by people (including children)
with impaired sensory or mental faculties or who do not have
adequate experience and/or knowledge of such devices, unless
they are supervised by a person responsible for their safety, or
have received instructions from such a person on how to use the
device.
■
Children
must
not
play with the device.
■
Cleaning and
user maintenance
may not be performed by
children
, unless they are supervised.
■
Children
younger than 8 years of age and animals must be kept
away from the device and the mains cable.
■
Babies and sleeping or unconscious people may
not
be treated
with the device.
■
The device should only be used and stored out of the reach
of children and animals. Improper use can lead to injuries and
electric shock.
■
The device must always be disconnected from the mains power
when left unattended and before cleaning it.
■
Check the device for damage each time before you use it. Only
use the device if the device, mains cable and mains plug have
no signs of damage! If the device, the mains cable or the mains
plug are damaged, they must be replaced by the manufacturer,