Total-Lift Bed
™
VG-TLB425T
Operation Manual
(For detailed instructions, safety guidelines and warnings
please refer to the owner’s manual)
Please Note:
When reaching the end of the movement of each function (unless stated
differently) two beeps will be heard as confirmation. All Functions
should be pressed continuously.
Safety Note:
When the bed is in tilting position all other functions will not work
except for (11) & (12) (12 after unlock) for raising the bed to standing
position and lowering the bed from standing to flat position.
Unlocking (Nurse Only!)
Press Buttons (11) and (12) together for 3 seconds until two
beeps will be heard.
Emergency Safe Mode
(In case the Bed “Freezes”)
Step 1 – Hold buttons 5 + 6 together for 5 seconds. The buzzer will give continues short
signals indicating the Bed is in safe Mode.
To tilt down - Press 11 until the bed is flat.
To lower Backrest - Press 2 until the backrest is flat.
Any time you have had to use the Safe Mode to lower the Total Lift bed, the bed
should be inspected by a qualified technician.
Blinking blue LED’s on the side-rails indicates a temporary bed stoppage to
help prevent a bed malfunction.
To Restart, simultaneously press buttons 3&4 continuously (10 beeps will be heard)
until beeping stops. LED’s should return to solid indicating bed is fully functioning.
In case Blinking continues or repeating, call a technician.
