7
USING THE STIMULATING GEL PADS
1. Connect the output wire to the Stimulating Massage Gel Pads.
2. Then connect the other end of the output wire to the output jack of the machine.
3. Remove the protecting film from the adhesive pads.
4. Attach the Stimulating Massage Gel Pads to the skin steadily.
5. Press the “
”
button for 3 seconds to turn the unit on and adjust the stimulating
mode and output intensity as you wish. (The display will show the mode and the
level that you selected and start to count down)
CAUTION
• Never stick two adhesive pads to each other.
• Keep the adhesive gel pads clean, and never put them under high temperature
and direct sunshine.
• If the stimulating massage gel pads are insufficiently adhesive or dirty, wipe with a
wet cloth or change to new ones. Don’t clean the stimulating massage gel pads
with any chemicals.
• For protecting the gel pads, always put them on to the gel pad protector after use.
• Do not increase to high level or above comfort level.
• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
• Young children should be supervised to ensure that they do not play with the appliance.
WARNINGS
• Do not remove the silicon pads when the device is working.
• Make sure the unit is off before connecting the silicon pad cable to the device.
• Don’t use on wounds or problem skin.
