6
CONNECTING THE POWER ADAPTOR
1. Connect the adaptor jack of the adaptor to the adaptor jack of the unit
2. Plug in the power adaptor to the wall socket. (Make sure that the input voltage
of the wall socket is suitable for the supplied adaptor)
HOW IT WORKS
1. In order to increase the conduction, apply some water on the sole of your foot.
2. Place your feet on the massager.
3. Press the “
”
button for 3 seconds to turn on the unit. The LCD screen will
light up in blue.
4. Then you can adjust the mode by pressing “P+” & “P-“ to select different
programs. Maximum 10 programs.
5. Gently increase the intensity setting by pushing the “ ” button, or decrease
the intensity setting by pushing the “ ” button. (Left button for “Band 1”, right
button for “Band 2”.) Maximum 40 levels.
6. You can adjust the program anytime, but once the program has been re-adjusted,
the intensity will return to ‘0’, in order not to shock the user from the new
program. The user will need to re-adjust the intensity.
7. To terminate the massage period, user can turn off the unit anytime by pressing
the “
”
button for 3 seconds.
Tip: Start massage at a low setting to begin, then gently increase.
AUTO FUNCTIONS
• The unit has an auto timer, it will start to count down from 25 minutes, and will
shut off after 25 minutes of massage.
• If you change the massage program within the 25 minutes, the timer will count
down from the original leftover time.
