13
4.2 Ambient conditions
•
Please observe the following ambient conditions:
Use indoors
Ambient temperature 2 °C to 40 °C
Relative humidity 80 % at 31 °C
Max. height 2000 meters above sea level.
Fluctuations in nominal voltage are not greater than plus/minus 10% of the nominal voltage
4.3 Symbols
3. Scope of supply / system solutions
4. Technical data / Information
5. Additional information
4. Technical data / Information
4.1 Specification
Dimensions (width/depth/height)
315 mm/500 mm/470 mm (closed)
Weight
27 kg (coated)
Housing
anthracite finish
Sintering chamber diameter
Usable diameter of 90 mm
Sintering chamber height
Usable height 70 mm
Sintering chamber temperature
Max. 1600°C
Electrical connection
230 V AC, 50 Hz
Power consumption
Max. 1500 Watt
Classification
Protection class 1
Application area
Approved for indoor operation only
Hazardous voltage
This pictogram warns the user about hazardous voltage. Before opening the
instrument, always disconnect it from the mains current by unplugging the
power plug.
Residual voltage
After the back plate has been removed, a residual voltage of up to 400 V may
still be present in components in the area of the power supply unit on the
circuit board, even when the device is switched off.
Hot surface
This pictogram warns the user about hot surfaces
that can cause burns.
Note
Do not place any objects in the area of the lift plate. For setting down firing
objects, use the laterally extendable cooling tables.
Separate disposal
This instrument and all accessories labeled with this symbol are subject to
Directive 2002/96/EC (WEEE) and the applicable national regulations and may
not be disposed of as unsorted municipal waste in the European Union (EU).
Old units can be returned to VITA Zahnfabrik.
CE marking
VITA ZYRCOMAT 6100 MS complies with the applicable regulations of the
European Union (EU). The declaration of conformity can be requested from
VITA (Regulatory Affairs Department) at: www.vita-zahnfabrik.com
ADDITIONAL INFORMA
TION
TECHNICAL DA
TA / INFORMA
TION
SCOPE OF SUPPL
Y
/ SYSTEM SOLUTIONS
FIRST USE
THE MODULAR SYSTEM
