VITA - Vacumat 4000 Premium
39/03/04
Vita Zahnfabrik H.Rauter GmbH&Co.KG 79704 Bad Säckingen
23
9.22 Temperature hold program
This program enables materials to be atmospherically fired in a low temperature range.
•
Select temperature hold program.
•
Confirm
with
OK
key.
•
Select desired field with
up/down
key and enter program values.
•
Save altered values with
OK
key.
•
Press
Start
key.
•
After program run, return to service menu with
service
key
or
•
return to main menu by pressing
main menu
key.
10 Connecting to PC for data transfer
This enables you to store your firing data for the purpose of quality assurance and proof of quality of dental
ceramic restorations.
With the aid of the FDS system (
F
iring
D
ata
S
ystem), available as special accessories, the firing data of the
firing program can be stored in a PC database together with further information such as: job no. type of
furnace, serial number of furnace, date and time. A graphic representation of the program run is also shown.
Various search criteria make it possible to search for and find a particular firing program at a later date/time.
The connection is made to the PC. The FDS system includes all the parts required for connection, as well as
the corresponding software and instructions for use.
11 Smart Card (disk)
The Smart Card supplied with the furnace (external memory card) includes the utility programs as well as the
firing programs which have been factory stored in the furnace. The Smart Card can be equipped with a write
protection (situated in the sleeve of the Smart Card). This makes sure that the facoty-stored firing programs
and service paremeters are not overwritten.
It should be noted that values altered and stored in the f urnace when transferring to the Smart card
overwrite the values stored on the Smart card.
If changes have been made to the utility programs or firing programs, the factory stored settings can be re-
stored in the furnace at any time.
With the Smart Card, which is available under Special Accessories, it is possible to store all customer-
specific programs externally. The Smart Card can also be used in a user-specific manner, i.e. every user of
the furnace can store his own programs on the Smart Card. The programs can be stored in the memory of
the furnace under the name of the user, stored, coded and used. (see section on coding user).
Software updates can likewise be transferred from the Smart Card to the internal memory.