At the bottom is a standard scrub bar that you can use to move the playback
to your preferred time.
Playback Controls
These generally match the standard controls on most video players:
Stops the playback.
Slows the playback to 1/2x. Subsequent clicks further reduce the speed
to 1/4x, 1/6x, and 1/8x.
Play/pause.
Speeds the playback to 2x. Subsequent clicks further increase the speed
to 4x, 6x, and 8x.
Advances the playback by one frame, then pauses.
Volume control.
Tool Bar
Click browse to search for previously saved videos and view them.
Take a snapshot of the current frame. You can select where it is stored
under Advance Set > File Locations. See “File Locations” on page 30.
Use this button to download a section of the video being played. Click
this button, then click on the desired start and end points of the extract. You
can select where it is stored under Advance Set > File Locations. See “File
Display just the current channel (recorder only).
Play 4 channel on the screen simultaneously (recorder only).
Enter full-screen mode. You can double-click the screen or press
Esc
to
quit full screen mode.
File mode toggle (see below).
Calendar and File Area
Click the date in calendar to choose the files according to conditions
Mode switching:
You can review files in either of two modes. The button
looks like
in table mode, where files are listed in a spreadsheet with date
and time; pressing the button toggles it to
and opens a timeline along the
bottom of the window, where the recordings are shown graphically.
In timeline mode, click and drag on the timeline to move it to the time
of interest. The + and - buttons in the top right of the timeline change its
magnification. Click a recording to begin playback.
