VI-‐1100 & VI-‐100-‐P
Installation Guide
01A.02
14
3.
Follow the instructions of the dialog boxes and complete the installation. Once the
installation is complete, start the web browser again and check if video stream is
displayed in the main view frame.
4.
Depends on Microsoft® Internet Explorer version, the web browser might need to be
refreshed or restart. Accesses the web address after all ActiveX are installed.
6.3. Wireless Access Setup
To utilize the wireless mode, the device needs to be connected to a wired network in first
place. Through setup web page, connection settings including accessing proper wireless
network, password, and IP configurations need to be processed.
1.
Connect the device to a wired network.
2.
Access the device’s page via Microsoft™ Internet Explorer
3.
Enter Setup from the top menu (factory default login ID/Pass are “root/pass”)
4.
Access “Wireless Lan” menu, which is under the Network Configuration sub-‐menu
5.
From the USB Wireless AP List tab, select the wireless network where the device will be
located under. Provide the network key (password).
6.
From the Wireless network IP configuration tab, select “Obtain an IP address via DHCP” or
“Use the following IP address”.
