Visual Productions IOCORE, Manual, Page: 56 / 58

URI Parameter Description
/core/blink - Momentarily flashes the IoCore’s LED
D.2 UDP
The following table uses GPO #1 as an example. The number ’1’ can be re-
placed by any number in the range of [1,6].
String Description
core-gpo-1= < 0/1 > Switch the relay on GPO port #1
The following table uses actionlist #1 as an example. The number ’1’ can
be replaced by any number in the range of [1,8]. The table also uses action #2
as an example. The number ’1’ can be replaced by any number in the range of
[1,48].
String Description
core-al-1-1-execute= < arg > Execute action #2 inside action list #1
core-al-1-enable= < bool > Set the ’enable’ checkbox for action list #1
The following table shows how to directly control the DMX values. The
DMX port needs to be switched to output. The table uses dmx channel #1 as
an example. The number ’1’ can be replaced by any number in the range of
[1,512].
String Description
core-dmx-1= < integer > Set the value of DMX channel #1
The following table shows how to active miscellaneous functions.
String Description
core-blink Momentarily flashes the IoCore’s LED
56