visualengineering.co.uk
Page 17
DropCam-SDR
Sept 2022
Status Overview Settings
Item
Options
Notes
Node ID
0 to 11 or 0 to 15
Node IDs 1 and 2 are shown� There could be up to
sixteen nodes in a Mesh, numbered 0 to 15�
Unit Name
Up to 12
characters can be
used for the Unit
Name
The Unit Name is a user friendly name to make it easier
to identify each camera node� This name is assigned in
the Global Settings Tab�
IP Address
192�168�1�180
for example
This shows the IP address of the unit that is set up in
the initial configuration. It is shown as a hyper-link. The
browser will switch to the node of the selected hyper-link�
Battery Voltage
0 to 16V
This returns the current input voltage of the node�
The voltage should show approximately 12v�
Occupancy
Blue and Orange
Bars
The blue bar gives a visual indication of the volume of
data generated by this node� An orange bar gives a visual
indication of the volume of data passing through�
Show Details
Check box
Displays network information about IP packets etc�
This displays detailed
status information
of received signal
quality and enables
navigation between
nodes� The Status tab
is divided into three
sub-tabs:
•
Overview
• Spectra
• Maps
