Camera User Manual
Visual Engineering Technologies Ltd.
Subject to change without notice
E&OE
Introduction to the Visual Engineering line of Surveillance
Cameras
Visual engineering cameras can be recognised from their equipment label, the following part
numbers are described in this document:
MKIIID
: 18 – 36 X Optical Zoom, IP67 PTZ Camera
MKIIIH
: High Definition IP67 PTZ Camera
MKIXB
: 36X Optical Zoom Forward Centre Camera
MKX
: Micro Forward Center Pan and Tilt Camera
COS-X-XX
: Micro Head Camera Flexible or Semi Rigid
PHC-XXX
: Micro Pin Hole Cameras 15 – 70mm
SWZ
: Miniature Pan and Tilt Camera
PPTZ-025010:
Pin Hole Pan Tilt Zoom Camera
HHC
: Camera Hand Controller for PTZ
DMMPTZC
: Digital Multi Meter Controller for PTZ
MKIIID: 18 – 36 X Optical Zoom, IP67 PTZ Camera
The MKIIID forms part of a line of highly integrated
surveillance products developed by Visual Engineering.
The device incorporates a high resolution block camera
based around one of either FCB-EX20D (10X low light),
FCB-EX990 26x optical zoom lens or FCB-EX1020E (36X).
An internal infra-red cut filter removal mechanism is used
to allow the camera to operate in both day and night
modes.
The PTZ utilises a VE standard connector providing power
and data to the unit.
The pan and tilt drive trains are actuated by gearless
stepper motors, reducing the operational noise to a
minimum. Pan and tilt speeds are zoom factor corrected,
giving fine control over the entire range of the lens.
Remote control of both the camera and pan and tilt drives
