ASSEMBLY INSTRUCTIONS
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS
ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
1.
DIRECT WIRE INSTALLATION (See Fig. 2)
1. Follow step 1 of CORD COVER ASSEMBLY.
2. Guide wiring from wall outlet through center hole in mounting plate (N). Affix
mounting plate (N) to wall outlet box with mounting screws (0) provided.
3. Cut fixture cord twelve inches away from fixture base (C) and remove by
grasping plug (G) and pulling out of cord cover (D, E & F).
4. Connect the ground screw (green color) of the fixture to the bare copper
ground wire in the outlet box. The insulation on the fixture cord that was cut to
twelve inches in length in step 3 has a smooth side and a ribbed side. Connect
the smooth wire to the black wire in the outlet box (not shown in diagram).
Connect the ribbed wire to the white wire in the outlet box.
5. Attach fixture base (C) to the affixed mounting plate (N), and secure with
base screws (P).
6. Follow steps 7 & 8 and adjustment of CORD COVER ASSEMBLY.
DRY
Boston Functional Double Arm Library Light
Item # SL2923
