ASSEMBLY INSTRUCTIONS
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS
ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
10. INSTRUCTIONS FOR MOUNTING FIXTURE OUTDOORS AND/OR IN WET
LOCATION:
a. Mounting surface should be clean, dry, flat and 114” larger than canopy/
fixture base on all sides. Any gaps between the mounting surface and canopy
exceeding 3/16” should be corrected as required.
b. With silicone (ex. GE-108) caulking compound, caulk completely around
where back of canopy meets the wall surface to prevent water from seeping
into outlet box.
WET
Elsinore Bracket Lantern
Item # CHD2952