VISTEON OH-7000, Operating Manual

Page: 7 / 15

Opening the OH-7000
monitor
By pressing the power button on
the OH-7000 control panel or
the remote control, the monitor
will lower to its last working position.
The position of the monitor can be raised or
lowered using the
5
or
6
buttons on the
remote control unit or the control panel.
Once the monitor has come to a stop, it can
be manually rotated through 20° both left
and right from the central viewing position.
Closing the OH-7000
monitor
Pressing the power button on the
OH-7000 control panel or the remote
control the monitor will automatically self
align itself and return to its closed
position.
If the OH-7000 is connected to the
vehicle reversing light output, the monitor
will automatically close to prevent the
drivers rear view vision being impaired.
The OH-7000 will also stop playback on
a Visteon media device that has been
configured to be integrated with the
OH-7000.
The monitor will return to its original
position once the vehicle is no longer in
reverse gear.
Selecting a Media device
or auxiliary equipment
The OH-7000 can accept up to 3 media
input devices, AV1, AV2, AUX (DVD, VCR,
Auxiliary input - Games console,
Camcorder, etc.)
If a media device is connected to the
OH-7000, press the 'AV' button until the
required AV channel is available.
The OH-7000 has the capability of
controlling the following Visteon products
for full system integration when connected
via the AV1 or AV2 inputs ports
(VR-2430, SD-8300, MC-8011X,
MB-8000).
20
Operating instructions
CAUTION: THE OH-7000 MONITOR
MUST NOT BE MANUALLY LOWERED OR
RAISED BY HAND AS THIS MAY DAMAGE
THE SCREEN'S MOTOR.