www.vistacnc.com
- 6 -
www.vistacnc.com
- 6 -
iMach
III
P1A Pendant LinuxCNC Manual v 1.0
2.6 STEP JOG RATE
Currently not in use.
2.7 OFFLINE
When the pendant is in Offline mode, any MPG signals are not sent to LinuxCNC application.
Offline mode can be used to align the MPG wheel to a specific number with no axis movement.
2.8
FEED OVERRIDE mode
In F% mode, turning MPG changes current feed overridden (FO) rate.
2.9 SPINDLE OVERRIDE mode
In S% mode, turning MPG changes spindle speed overridden rate.
2.10 CONTINUOUS RATE mode
Same as F%. see 2.5 FEED OVERRIDE mode.
3.
E-Stop switch button
3.1
E-Stop switch button in P1A model
